presents the official Samsung Galaxy J7 Repair, Disassembly and Assembly Guide (2016). This step-by-step repair video will show you how to replace a broken or damaged Galaxy J7 screen assembly in 2016, and how to completely disassemble and reassemble your Samsung phone. Visit Fixez.com to get all the DIY Samsung Galaxy J7 replacement screens (2016), the parts and tools you need to repair your device quickly and affordably.
If you need to repair your Galaxy J7 (2016) as soon as possible, we will also cover it there. Contact one of our specialized technicians at 866-233-6460 or [email protected] and they will repair your Samsung phone. They are available Monday through Friday, from 9:00 a.m. at 5:00 p.m. PST.
Subscribe to our YouTube channel for more videos and repairs of smartphones and DIY tablets!
I like it on Facebook:
Follow us on Twitter:
Samsung Galaxy J7 (2016) Repair, disassembly and reassembly guide of the Video Transcription guide:
You are performing this repair at your own risk
We are not responsible for any damage that may occur
The Samsung Galaxy J7 (2016) DIY repair tools used in this video can be found here:
Turn off your Samsung Galaxy J7 2016 phone.
Step 2 (Samsung Galaxy J7 (2016) Back cover of the battery)
Easily remove the back cover of the Galaxy J7. No tools needed!
Step 3 (Samsung Galaxy J7 (2016) battery)
Take out the Samsung Galaxy J7 (2016) battery 3300 milliamperes-hour (mAh).
Step 4 (Samsung Galaxy J7 (2016) Exterior Midframe)
Remove the next 18 Phillips screws.
Use the triangles opening tool to work around the Samsung phone and release the outer midframe.
Step 5 (Samsung Galaxy J7 Speaker (2016))
Eradicates the case of the Galaxy J7 midframe speaker.
Step 6 (Samsung Galaxy J7 motherboard (2016))
Disconnect the cable from the screen and then the cable for the headphone jack assembly.
With the cables out of the way, lift the Galaxy J7 motherboard.
Step 7 (Samsung Galaxy J7 (2016) Rear-facing camera and front camera)
Accumulate the 5-megapixel Samsung Galaxy J7 front camera.
Remove the 13-megapixel Galaxy J7 (2016) rear camera from the motherboard.
Step 8 (Samsung Galaxy J7 (2016) Vibrator and Headset Speaker)
With the clips in your hand, remove the speaker from the headset.
Start the Galaxy J7 vibrator connected by contact with spring.
Step 9 (Samsung Galaxy J7 screen assembly (2016))
Begin releasing the Galaxy J7 Super AMOLED display assembly using the hot air gun to heat the adhesive.
With the precision blade, carefully create the separation and insert a game card to start cutting the adhesive.
Use playing cards to attack the adhesive that secures the screen assembly to the inner frame. Take your time and apply additional heat as necessary.
Once the adhesive has been cut, consider the screen cable and lower button cables when undocking the Galaxy J7 2016 screen from the middle frame.
Step 10 (Samsung Galaxy J7 start button (2016), headphone jack, cables for the bottom buttons and start button switch)
Remove the start button of the Galaxy J7 (2016).
Remove the headphone connector assembly. Includes the start button, the cables for the bottom buttons and the headphone jack.
* To reassemble your device, follow the steps in reverse order.
Video credits to Fixez.com YouTube channel